Author: pandariot779

Facebook page: https://www.facebook.com/pandariot779 Learning how to use worbla, paint, web design, 3d design, program, and other fun hobbies.

Turning 2 liter Soda Pop Bottles in Splatoon Canisters

This is for those who cosplays those splatoon characters. I made this and it works with 2 liter soda bottles. Enjoy.

 

 

Link to 3d model: http://www.3dupndown.com/content/?pcode=cont_view&idx=7785

Links to belt strap: http://amzn.to/2tDPGSi

Advertisements

PandaRiot779 Visit Wizard World Sacramento

Yo! I postponed studying for my Final next Wednesday to visit Wizard World and snap some photos.

Some dude came up to from behind and asked if I was PandaRiot779…. “Yes, I am but I am busy using the Urinal.”

——————–Note to people who know who I am…. I have a huge bubble when I am in the bathroom…. and it stays pretty big when I recently leave a bathroom…  Some kid hugged me from behind after I left the bathroom and scared the hell out me. . . . I elbowed her in the face… sorry ————————- I didn’t take a photo.

Got to walk past Kate Beckinsale…. All I wanted was a high five from her but a quick shot of MaidofMight in her Selene Cosplay was good enough.

Here’s a Link to all the photos I took.

Link to PandaRiots Wizard World Sacramento 2017 Album:

 

I used an 85mm lens and it is tough for me to take full body shots since everyone was concentrated on the show floor and I require at least 4-6 feet to take a good shot. I was only limited to portrait shots.

Thank you for visiting. I am starting a Print Store with Cosplayers I work with. Follow my Instagram as I slowly populate my store.

New Cosplay Album on my page. please regard Sinastri

Although I only got to meet her very briefly, I was able to take a few sweet photos of Sinastri Cosplay. She is quite the lovely cosplayer and you if get a chance please take a moment to appreciate her previous work and support her by buying her prints at: http://sinastricosplay.storenvy.com/

 

Can see the photos I’ve took of this talented cosplayer here:

DSC02842lo

Link to Pandariot779’s Photos of Sinastri Cosplay

3D modeled Splatoon Canister and Zaofu Spear from Legend of Korra

Two of my latest models are finished, have fun watching the videos. I lost footage of myself 3d modeling but I still have the footage of the printing process.

 

They fit well and make sure to prime the plastic thoroughly before painting. I prefer wood glue.

 

Here’s a link to the models:

Splatoon Canister

Zaofu Spear

Fanime is Over Here’s your phtos

Half way through uploading the photos I ran out of storage on my website and needed an alternative method of returning photos. So I decided to seperate/sort the photos om a way that helps cosplayers find themselves. The photos are divided into groups and numbers so I can easily direct cosplayers to their pictures. Might be a little confusing cause I had to use Google Photos mid way through uploading and I’m too lazy to make things consistent.

Alright click this Link: Fanime 2017

The first few groups are organized under whomever gave me their cards. Then into genres, and finally into cosplays I do not recognise. There are images of every cosplayer in each group and under each set of pictures is a link to the google album. (click your Instagram name)

Enjoy.

Please consider following my pages:

Ing: @pandariot779

Youtube: @pandariot779

Facebook.com/pandariot779

Twitter: @pandariot779

Patreon: https://www.patreon.com/user?u=3146047

And shoot me a message if you have ideas for 3d modeling and printing….. and laser cutting.

Thanks, Hope to see you guys at Anime Expo. :3

Booking PhotoShoots for Fanime 2017

Yo whats up! I’ll be at Fanime for a lot longer than I originally planned. Will be roaming the halls for photoshoots after I settle in with some friends and I am booking shoots!

You can book a shoot with online here:

https://10to8.com/book/emwabc-free/

Instructions:

Click on link

click on 1 hour photo sessions

then click on see times

and finally

choose a time I am available.

enter your cosplay Info and contact method

Please give me a few moments to accept and them we are set!


I do not charge money but I do accept donations up to 20 dollars. thanks

www.paypal.me/pandariot779

Hiding 3D Printed Pokemon at Cons

No automatic alt text available.

Hey! I enjoy doing photography at cons and I also like to share what my 3d printer prints. I am hiding a variable amount of pokemon at conventions I go to and hope people can help me out by donating filament via my amazon wishlist:

my amazon wishlist: http://a.co/e35BW5R donating to my

donating to my paypal: https://www.paypal.me/Pandariot779 or becoming a dollar sub on my

becoming a dollar sub on my patreon https://www.patreon.com/user?u=3146047

you can also help me by ordering things from my merchandise page. I am an amazon associate and every penny counts. Also if you have any ideas on what to add to my merchandise page please let me know!

Please let me know you donated so I can print a special pokemon for you. 🙂

 

Thanks. The pokemon are now printing.

Created Marie’s Marie’s Mjolnir from Soul Eater

link to Thingiverse model: http://www.thingiverse.com/thing:2273861


 

Hey this is a commission I made . It is Mjolnir from Soul Eater.

marie mjolnir photo souleater_marie2.jpg

I initially made a 3d model of it using fusion 360

The model was pretty basic and easily done. took me about 15 minutes to throw it together. I then 3dprinted it and showed the print to my client to make sure she liked the design of the hammer before I proceed to designing puzzle pieces.

After the client said “I love it,” I began designing the puzzle pieces which took about 5 hours.

After this step I began laser cutting the pieces and glueing them together

The pieces did have these tooth edges that could be easily sanded off.

I used plastic wood as wood filler to fill the joints between all of the pieces

Then used an electric sander to sand it real smooth before priming it with spray filler.

It now just needs a final sand to make it completely smooth

 

Thanks for reading!

Remixed Adafruit’s Lie Ren’s Stormflower Gun Blade

here’s a link to their tutorial: https://learn.adafruit.com/stormflower-gun-blade/overview

After I noticed some of the pieces were too tight I decided to remix the models. I made the sockets better to account for pla and abs expansion.

I also made the trigger spring loaded.

 

😀 Link to my Remix: http://www.thingiverse.com/thing:2265296

 

 

shoot me a message for questions, feedback, and requests.